Front

The Front module serves several purposes:

• The Top, Rear, and Bottom Horns are screwed into the Front, much like building on a foundation.
• The belts secure at each side of the Front.
• The Hotend and Drive modules both attach to it.
• The ABL Side Mount, if needed, goes on the left side.
• Lastly, it can mount an accelerometer.

ADXL345 Front

EVA

v0.5

General Notes

Mounts an ADXL345 accelerometer (the same as stock EVA 3).

Materials

Type	Part	Qty
Printed	front_adxl345.stl	1 Ea
Accelerometer	ADXL345	1 Ea
DIN 912	M3 x 6mm SHCS	6 Ea
Other Fastener	M3 x 5mm OD x 4mm L Insert	16 Ea
Printed	belt_grabber.stl	2 Ea

Heat Set Insert Locations

---

Basic Front

EVA

v0.5

General Notes

This version of the Front does not mount an accelerometer.

Materials

Type	Part	Qty
Printed	front_basic.stl	1 Ea
Other Fastener	M3 x 5mm OD x 4mm L Insert	14 Ea
Printed	belt_grabber.stl	2 Ea
DIN 912	M3 x 6mm SHCS	4 Ea

Heat Set Insert Locations

---

Portable Input Shaper Front

EVA

v0.5

General Notes

Mounts a FYSETC Portable Input Shaper.

Materials

Type	Part	Qty
Printed	front_fysetc_pis.stl	1 Ea
Other Fastener	M3 x 5mm OD x 4mm L Insert	16 Ea
Accelerometer	FYSETC Portable Input Shaper	1 Ea
DIN 912	M3 x 6mm SHCS	6 Ea
Printed	belt_grabber.stl	2 Ea

Heat Set Insert Locations

---