X Axis Stop Blocks
Stop blocks are bumpers for the X endstop (or toolhead if using sensorless homing). Several options are available based on your needs.
Adjustable X Axis Stop Block
0.1
General Notes
This is an adaptation of the M1 stop block for EVA 3. It acts as a bumper for the X endstop that can be moved to trigger at the edge of the bed.
| Type | Part | Qty |
|---|---|---|
| Printed | x_axis_stop_block.stl | 1 Ea |
| DIN 912 | M3 x 6mm SHCS | 2 Ea |
| Other Fastener | 20 Series M3 Roll-in T-Nut | 2 Ea |
0.1
General Notes
This is an adaptation of the M1 stop block for EVA 3. It acts as a bumper for the X endstop that can be moved to trigger at the edge of the bed.
| Type | Part | Qty |
|---|---|---|
| Printed | taller_x_axis_stop_block.stl | 1 Ea |
| DIN 912 | M3 x 6mm SHCS | 2 Ea |
| Other Fastener | 20 Series M3 Roll-in T-Nut | 2 Ea |
Max X Stop Block
General Notes
These blocks sit on top of the X Joints and trigger the limit switch at the maximum possible X travel distance.
The M5 x 16mm screw replaces the M5 x 12mm screw that normally attaches the X joint to the X extrusion.
| Type | Part | Qty |
|---|---|---|
| Printed | x_axis_max_x_stop_block.stl | 1 Ea |
| DIN 912 | M5 x 16mm SHCS | 1 Ea |
General Notes
These blocks sit on top of the X Joints and trigger the limit switch at the maximum possible X travel distance.
The M5 x 16mm screw replaces the M5 x 12mm screw that normally attaches the X joint to the X extrusion.
Variant Notes
This block triggers the X axis on an Ender 5 Plus to give exactly 377mm of travel.
| Type | Part | Qty |
|---|---|---|
| Printed | e5plus_x_axis_stop_block.stl | 1 Ea |
| DIN 912 | M5 x 16mm SHCS | 1 Ea |