Skip to content

Displays

Display Panels mount two different types of display screens:

  • MCU displays include various TFT and older 128x64 character LCD diplays.
  • Raspberry Pi displays are TFT displays, usually used with OctoPrint or Klipper.

MCU Displays

front left render

12864 TFT display mounted on a panel.

Each supported MCU display screen has a subfolder in the /Panels/Display git folder. There is an optional STL file for a replacement display knob, as well.

Component names below link to the corresponding git folder. Most mounts require four (4) 6mm M3 screws to fasten the display in place. Some mounts have two or three pieces and require additional materials.

Generic 12864 Display

Generic 12864

Product Link

  • Materials: 4x M3 x 6mm
  • Notes:
    • Also known as Creality CR-10 stock display in Marlin.
    • Common on many older i3-style and Creality printers.

product picture

FYSETC Mini 12864

Mini 12864

Product Link

  • Materials:
    • 4x M3 x 6mm
    • 4x M3 x 20mm
  • Notes: This includes BIGTREETECH brand and other clones.

product picture

BIGTREETECH 2.4" TFT

BTT 2.4 TFT

  • Materials:
    • 4x M3 x 6mm
    • 4x M3 x 8mm
  • Notes: This product is discontinued.

product picture

BIGTREETECH 3.5" TFT

BTT 3.5 TFT

Product Link

  • Materials:
    • 4x M3 x 6mm
    • 4x M3 x 8mm
  • Notes: This is not the E3 version, which uses the Generic 12864 display mount.

product picture

BIGTREETECH 3.5" TFT E3

Fit Test Pending: See Issue #115

BTT 3.5 TFT E3

Product Link

  • Materials: 4x M3 x 6mm
  • Notes: Not compatible with the generic 12864 mount.

product picture

BIGTREETECH HDMI5

Contributed by SirUli

BTT HDMI5

Product Link

  • Materials:
    • 4x M3 x 15mm
    • 4x M3 x 6mm
    • 4x M3 x 5mm OD x 4mm L HSI

product picture

CPU Displays

Many Klipper and Octoprint users have a CPU display attached to their Raspberry Pi (or other SBC), and some forego an MCU display entirely.

Any TFT designed with mounts points for a Raspberry Pi on the back should be compatible with OmniBox. These can all be mounted on short lids; some can be mounted as display panels. Users have also contributed additional display panel designs for specific TFT models.

display panel tft
Displays up to 7" can be attached to the lid.

display panel tft
Although any display can be mounted to the panel, 7-inch displays block the mounting holes.

display panel tft
Flush-mount panels are available for certain models. Illustrated is MaffooClock's panel for the BIGTREETECH PITFT50.

Known compatible displays are listed below, along with mounting options.

Display / Mounting Location Display Panel Lid Custom Display Panel
BIGTREETECH PI TFT43 ✅ ✅ ❌
BIGTREETECH PI TFT50 ✅ ✅ ✅
BIGTREETECH PI TFT70 ❌ ✅ ❌
Raspberry Pi 7" TFT ❌ ✅ ✅

Universal Short Lid

Note: Use the XL file for 7-inch TFTs

Pi TFT

  • Materials:
    • 4x M2.5 screws
    • 4x M2.5 brass standoffs (10-12mm)
  • Notes:
    • The Raspberry Pi 7" TFT may not come with the necessary standoffs.
    • Materials are included with all models of the BIGTREETECH PITFT.

lid tft

Universal Display Panel

Rasperry Pi TFT

  • Materials:
    • 4x M2.5 screws
    • 4x M2.5 brass standoffs (10-12mm)
  • Notes:
    • The Raspberry Pi 7" TFT may not come with the necessary standoffs.
    • Materials are included with all models of the BIGTREETECH PITFT.

display panel tft

BIGTREETECH 5" Pi TFT

Contributed by MaffooClock

BTT PI TFT50

Product Link

  • Materials:
    • 8x M2.5 x 6mm screws
    • 4x M3 x 6mm screws
    • (HSI version) 4x M3 5mm OD x 4mm heat set inserts

product picture

Raspberry Pi 7" TFT

Contributed by Anton Chebotaev

Raspberry Pi Touchscreen

Product Link

  • Materials:
    • 4x M3 x 8mm screws or
    • 4x M3 x 16mm screws

product picture