MCUs/Control Boards
This page lists MCUs that are currently compatible with OmniBox.
Micro-controller unit (MCU) board are mounted on MCU Trays. These parts are in the /Trays/MCU git folder, with each component in its own subfolder. There are STEP and Fusion 360 template files available for adding support for other boards.
For each entry, Materials are the fasteners required to mount the board, while the MicroSD Extension for the front panel is optional (but recommended).
Tip
Looking for a board that isn't listed? Open an issue!
BIGTREETECH
SKR Series
SKR 1.3 - 2.0
- Materials: 4x M3 x 6mm
- MicroSD Extension: Long
- Notes: SKR 3 and SKR 3 EZ are incompatible. See below.
SKR 3
Fit Test Pending: Issue #48
- Materials: 4x M3 x 6mm
- MicroSD Extension: Long
- Notes: SKR 3 EZ and earlier SKR models are incompatible.
SKR 3 EZ
Fit Test Pending: Issue #48
- Materials: 4x M3 x 6mm
- MicroSD Extension: Long
- Notes: Not compatible with other SKR trays.
SKR 3 E3 Series
All versions of the SKR E3 series are compatible with one tray, uncluding the Mini, Turbo, and RRF versions.
- Materials: 4-5x M3 x 6mm
- MicroSD Extension: Short
- Notes: Same mounting hole pattern as Creality 1.X/4.X boards.
Manta Series
The Manta M4P is not currently supported, but may be added in a future release.
Manta M8P
Octopus Series
The Octopus Pro is not currently supported, but may be added in a future release.
Octopus
Creality
Creality 1.X & 4.X
- Materials: 4-5x M3 x 6mm
- MicroSD Extension: N/A, uses full-sized SD cards
- Notes: Compatible with version 1.x/4.x.
Creality 2.X
Contributed by Mr Meh
Printables - Creality 2.5.2 Board
- Materials: 4x M3 x 6mm
- MicroSD Extension: N/A, uses full-sized SD cards
- Notes: Tested with a 2.5.2 board
Duet3D
Duet 3 Mini 5+
Compatible with all versions.
- Materials: 4x M3 x 6mm
- MicroSD Extension: Short
Duet 3 6HC
Compatible with all versions.
- Materials: 4x M3 x 6mm
- MicroSD Extension: Short
FYSETC
FYSETC Spider 2.x
Contributed by MaffooClock
- Materials: 4x M3 x 6mm
- MicroSD Extension: Short
- Compatibility: 2.x tested; may work with 1.x
MakerBase
MKS Monster8
MKS Skipr
Contributed by Killajoedotcom
- Materials: 4x M3 x 6mm
- MicroSD Extension: Short
