Skip to content

Preparation

Heat Set Inserts

step 1

Step 1. Install heat set inserts into three (3) of the four (4) highlighted holes in the fan. The fourth may be left unused.

step 2

Step 2. Install heat set inserts into the three (3) highlighted holes in the fitler cage.

Magnet Installation

step 1

Step 1. Fix magnets into the six (6) highlighted locations. It is strongly recommended that the polarity of the magnets are all oriented the same direction.

step 2

Step 2. Fix magnets into the six (6) highlighted locations. These magnets must have the same orientation as the base magnets.

step 3

Step 3. Test that the filter and base snap together properly. Once any issues are fixed, optionally add a drop of super glue to the highlighted well area next to each magnet; this will help ensure magnets do not come loose.