Insert Locations

This page contains a map of where heat set inserts should be installed for the Main Body and Base, both regular HSI and Full HSI.

Main Body

Crossbar

This part requires two (2) inserts.

Two (2) inserts.

Front

This part requires twenty-four (24) total inserts for a Front/Rear build and eighteen (18) for a Unified build. Full HSI builds add another eight (8) inserts.

Six (6) inserts.
Skip this step for a Unified build.

Four (4) inserts.

Eight (8) inserts.

Two (2) inserts.

Four (4) inserts.
Note: the surface is at a 50 degree angle.

Eight (8) inserts.
Note: Full HSI builds only.

Rear

This part requires twenty-two (22) inserts for an HSI build and thirty-eight (38) for a Full HSI build.

Six (6) inserts.

Eight (8) inserts.

Six (6) inserts.

Two (2) inserts.

Sixteen (16) inserts.
Note: Full HSI builds only.

Base

Front

This part requires twelve (12) inserts for a Front/Rear build and eight (8) inserts for a Unified build.

Four (4) inserts.

Four (4) inserts.

Four (4) inserts.
Skip this step for Unified builds.

Rear

The standard HSI build uses twelve (12) inserts.

Four (4) inserts.

Four (4) inserts.

Four (4) inserts.