CPUs
This page lists system-on-a-chip (SoC) CPUs currently compatible with OmniBox. These are commonly known as single board computers (SBC).
If you do not use an SBC, the side of the CPU bay can be used as a Side Panel.
Raspberry Pi 3B+
cpu_v3
General Notes
This faces the Raspberry Pi's connectors outwards and will require a visible external cable to the MCU.
Materials
| Type | Part | Qty |
|---|---|---|
| Printed | CPU Tray V3 - RPi 3B+.stl | 1 Ea |
| DIN 912 | M3 x 6mm SHCS | 4 Ea |
| CPU | Raspberry Pi 3B+ | 1 Ea |
Raspberry Pi 4B
cpu_v3
General Notes
This faces the Raspberry Pi's connectors outwards and will require a visible external cable to the MCU.
Materials
| Type | Part | Qty |
|---|---|---|
| Printed | CPU Tray V3 - RPi 4B.stl | 1 Ea |
| DIN 912 | M3 x 6mm SHCS | 4 Ea |
| CPU | Raspberry Pi 4B+ | 1 Ea |
Raspberry Pi and compatible
cpu_v3
General Notes
This tray has the Raspberry Pi mounting hole pattern and is compatible with clones (e.g., Orange Pi, Banana Pi) that use the same hole pattern and PCB dimensions.
| Type | Part | Qty |
|---|---|---|
| Printed | RPi Universal Tray without Fan.stl | 1 Ea |
| CPU | Raspberry Pi 4B+ | 1 Ea |
| DIN 912 | M3 x 6mm SHCS | 4 Ea |
cpu_v3
General Notes
This tray has the Raspberry Pi mounting hole pattern and is compatible with clones (e.g., Orange Pi, Banana Pi) that use the same hole pattern and PCB dimensions.
| Type | Part | Qty |
|---|---|---|
| Printed | RPi Universal Tray without Fan - HSI.stl | 1 Ea |
| Other Fasteners | M3 x 5mm OD x 4mm L Insert | 4 Ea |
| CPU | Raspberry Pi 4B+ | 1 Ea |
| DIN 912 | M3 x 6mm SHCS | 4 Ea |
cpu_v3
General Notes
This tray has the Raspberry Pi mounting hole pattern and is compatible with clones (e.g., Orange Pi, Banana Pi) that use the same hole pattern and PCB dimensions.
| Type | Part | Qty |
|---|---|---|
| Printed | RPi Universal Tray with 40mm Fan.stl | 1 Ea |
| Fan | 40mm x 10mm Axial Fan | 1 Ea |
| DIN 912 | M3 x 15mm SHCS | 4 Ea |
| CPU | Raspberry Pi 4B+ | 1 Ea |
| DIN 912 | M3 x 6mm SHCS | 4 Ea |
cpu_v3
General Notes
This tray has the Raspberry Pi mounting hole pattern and is compatible with clones (e.g., Orange Pi, Banana Pi) that use the same hole pattern and PCB dimensions.
| Type | Part | Qty |
|---|---|---|
| Printed | RPi Universal Tray w 40mm Fan - HSI.stl | 1 Ea |
| Fan | 40mm x 10mm Axial Fan | 1 Ea |
| DIN 912 | M3 x 15mm SHCS | 4 Ea |
| Other Fasteners | M3 x 5mm OD x 4mm L Insert | 8 Ea |
| CPU | Raspberry Pi 4B+ | 1 Ea |
| DIN 912 | M3 x 6mm SHCS | 4 Ea |
cpu_v3
General Notes
This tray has the Raspberry Pi mounting hole pattern and is compatible with clones (e.g., Orange Pi, Banana Pi) that use the same hole pattern and PCB dimensions.
| Type | Part | Qty |
|---|---|---|
| Printed | RPi Universal Tray with 50mm Fan.stl | 1 Ea |
| Fan | 50mm x 12mm Axial Fan | 1 Ea |
| DIN 912 | M3 x 16mm SHCS | 4 Ea |
| CPU | Raspberry Pi 4B+ | 1 Ea |
| DIN 912 | M3 x 6mm SHCS | 4 Ea |
cpu_v3
General Notes
This tray has the Raspberry Pi mounting hole pattern and is compatible with clones (e.g., Orange Pi, Banana Pi) that use the same hole pattern and PCB dimensions.
| Type | Part | Qty |
|---|---|---|
| Printed | RPi Universal Tray w 50mm Fan - HSI.stl | 1 Ea |
| Fan | 50mm x 12mm Axial Fan | 1 Ea |
| DIN 912 | M3 x 16mm SHCS | 4 Ea |
| Other Fasteners | M3 x 5mm OD x 4mm L Insert | 8 Ea |
| CPU | Raspberry Pi 4B+ | 1 Ea |
| DIN 912 | M3 x 6mm SHCS | 4 Ea |